Our company offers a range of single core cable 300 mm for use in the internal wiring of devices or for conduit or trunking wiring. Available from 0.5mm² up to 240mm² in a various range of colors.
This single core cable 300 mm can be installed where temperature ranges are widely variable. Like other cables in the range, it performs extremely well under fire conditions, being halogen free and low in smoke. It is a flexible and durable cable, which is resistant to many chemicals and adverse climatic conditions.
-The interphase insulation of this single core cable 300 mm is easy to guarantee and the interphase short circuit is not easy to happen.
-The cable transportation is more convenient and the laying is easier.
-A dish of cable can be made longer, the same section, the single cable carrying capacity.
|Product Name:||single core cable 300 mm|
|Insulation:||XLPE (Cross linked polyethylene)|
|Rated voltage:||600/1000 Volts|
Power cable suitable for power networks, direct burial, outdoors, indoors and in cable ducts
Conductors: Plain annealed stranded copper
Conductor stranding: Class 2 Stranded circular or circular compacted
Conductor identification: Brown
Insulation: XLPE (Cross linked polyethylene)
Core identification: Brown
Bedding: PVC (Polyvinyl-Chloride)
Armour/Protection: AWA (Aluminium wire armour) non-magnetic
Sheath/Jacket: PVC (Polyvinyl-Chloride)
Operating temperature Maximum 90°C, Minimum bending 0°C
Minimum bending radius: 6 x overall diameter(Wherever possible, larger installation radius should be used)
Standards: BS5467: Electric cables. Thermosetting insulated, armoured cables for voltages of
600/1000V and 1900/3300V. IEC 60502: Power cables with extruded insulation and their accessories for rated voltages from 1kV to 30kV. Flame Propagation Test to BS EN 60332-1-2 for single cable.
Notes: For current rating refer to Table 4E3A
If you are considering installing in high UV exposure and/or high/low ambient
temperatures i.e. desert/arctic conditions then special sheathing may be required