Armoured cable for project is made of different material conductors in a metal sleeve with an insulating material that is machined into a flexible, flexible assembly.
Armored cables include armored thermocouples, armored thermal resistors, armored heaters and armored leads. They are mainly used for temperature measurement, signal transmission and special heating in chemical, metallurgical, mechanical manufacturing, power generation and scientific experiments. It is an armored thermocouple.
This armoured cable for project is suitable for AC rated voltage 1.8/3kv and under transmission line. With typical mechanical and physical property, its electric property is also accord with GB/T12706-2008 and IEC60502-2004.
-Bedding: Polyvinyl chloride (PVC) bedding is used to provide a protective boundary between inner and outer layers of the cable.
-Armour: Steel wire armour provides mechanical protection, which means the cable can withstand higher stresses, be buried directly and used in external or underground projects.
-Sheath: a black PVC sheath holds all components of the armoured cable for project together and provides additional protection from external stresses.
|Product Name:||armoured cable for project|
|Rated voltage:||600/1000 Volts|
Operating characteristic of control cable
1) Laying temperature:≥0℃
2) The continuous permissible operating temperature of conductors shall not exceed 70 ℃.
3) During short circuit (lasting less than 5 seconds) the maximum temperature of the cable conductor shall not be above 160°C
4) Bending Radius
single core cable:20D
5) Cable AC withstand voltage test